Weightronix QC3265 Checkweigher
The QC3265 Quick Check checkweigher from Avery Weigh-Tronix, combines rugged stainless steel construction with the proven accuracy of specially designed stainless steel load cells. The foundation of the Model QC3265 Checkweigher is the Avery Weigh-Tronix base, the industry standard for durability. With added rapid response time, one-stroke setup functions and simplified operation, the QC3265 does just what you need a checkweigher to do: provide fast, accurate checkweighing.
Features
Indicator
Display
LCD: 7-segment, 6-digit, 0.7”
high with 5 decimal point
LED: 7-segment, 6-digit, 0.6” high with 5 decimal point
Power Requirements
Standard default: 115 VAC, ±10% to -15% @ 0.10 Amp
maximum
50/60 Hz, 10 watts max
Power cord length, 6 feet (1.8 meters)
Optional: 230 VAC +10% to -15% @ 0.05 Amp
maximum
50/60 Hz, 15 watts max.
Optional Battery: LCD display only
12 VDC (10 to 15 volts) -
@ 80 mA with 1 load cell
@ 131 mA with 4 load cells
Operational annunciators
Over, Accept, Under, lb, kg, oz, g, lb/oz and
Center Zero
A/D Conversion Rate
60 Hz. Delta-Sigma type converter
Internal resolution
4,718,592 counts per mV/V per second
Excitation for Load Cells
Voltage : 6 volts DC (LCD), 10 volts DC (LED)
Available Current:
LCD: 69 mA (four 350 ohm load cells)
LED: 114 mA (four 350 ohm load cells)
Controls
QUICK CHECK: Toggles between checkweigh mode
and weight display mode
TARGET: Enters target weight
UNITS: Changes enabled units of measure
ZERO: Zero balances the scale
Optional Battery
Available for the LCD version only –
12 volt DC sealed lead acid battery
30 hour battery life
14 hour recharge time
Low battery warning
Low power shutoff
Charging can occur during AC operation
Construction
Stainless steel, NEMA 4X/IP66 enclosure
Calibration and Programming
All calibration and programming is done through the
front panel with data stored in nonvolatile memory.
Display rates
1, 2, 5, or 10* times per second
Filtering
1*, 2, 5, or 10 display intervals
Push Button Zero Range
±1%, ±2%, ±5%, ±10%, ±20%, ±50%, ±100%* of Capacity
Motion Detection Window
d = 1 displayed division
±0.25 d, ±0.5 d, ±0.6 d, ±1 d*, ±2 d, ±3 d, ±5 d
Automatic Zero Tracking
d = 1 displayed division
Window: ±0.25 d, ±0.5 d, ±0.6 d*, ±1 d, ±2 d, ±3, ±5 d,
Rate: 0.1 division per second
Starting Delay: 2 seconds
Over Range Capacity
The scale displays weights up to capacity plus 9
divisions, referenced from the zero value determined
by zero setting point, or 105% of capacity, referenced
from the deadload.
Under Range Capacity
The scale displays weights in the negative direction
using the same restrictions as for over-range, but
further limited by the number of display digits
available.
Temperature Range
-10 to 40°C (14 to 104°F)
-30 to 60°C (-22 to 140°F) with reduced accuracy
Humidity
Up to 100% relative humidity.
Accuracy (indicator)
NTEP Class III 6,000d CC#96-020 (Indicator)
Measurement Canada Cert# AM-5127 (Indicator)
EU Trade Approved (Complete scale)
3,000d EC certificate TAC DK0199.41