{{Cart.length}} items in your Quote Request

print email

Torque Lab Analyzer LTT-Series (NEW)
Torque Lab Analyzer LTT-Series (NEW)
Mountz

Mountz Torque Lab Analyzer LTT-Series (NEW)

The new LTT is the next generation of Mountz torque analyzer. It offers “EZ-Plug & Play” with instant auto recognition with Mountz transducers. The LTT offers tool testing, graphing capabilities and a graphical menu for easy navigation.

Models

Features

Accuracy +/- 0.5% of reading from 20% to 100% of full scale.

Accuracy +/- 1% of reading from 10% to 20% of full scale.

Recommended for all hand screwdrivers, wrenches or power tools.

Provides “EZ-Plug & Play” with Mountz Transducers. Features “ARCII” technology, an instant auto-recognition system of the transducer connected to the LTT.

Selection of six operating modes: (Track, Peak, First Peak, Audit, Torque + Angle, and Tool Test).

Seven units of torque measurements: (ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm).

Two units of force measurements: (lbf and kN).

Features built-in Tool Tests operation.

“Flash" memory allows upgrades to be done by the user in the field & internet through the USB port.

Five low-pass filter selections (3000, 2000, 1500, 500 and 200 Hz).

USB interface to download readings to PC.

High Capacity Li-Ion Batteries for long life (30 hrs with standard transducers and 16 hrs with brushless rotary).

Can connect to most mv/v transducers and can store calibration data for up to 50 non smart torque & force sensors.

The 5VDC capability allows unit to be used with a Brushless Rotary Transducer for testing pulse tools and high RPM tools.

Torque and Angle data is displayed simultaneously when used with Torque and Angle transducers, up to 8000 RPM for angle measurement.

Stores a total of 2500 data points.

Features a Buzzer and Go / No Go LEDs that illuminate when high or low setting is achieved.

Real time graph of torque vs. time using associated PC Windows software.

Display Accuracy is better than +/- 0.0625 of reading.

Includes three PC Windows based software programs:

Mountz Torque Meter Interface Program- for sensor calibrations, meter calibration and tool tests.

Torque Meter Bootloader - for updating the LTT operating systems.

 

 

Note!

Since a tester cannot always duplicate actual joint characteristic, the torque reading displayed on the LTT may vary from the actual torque that a tool will apply to a joint. When critical assemblies are involved, the torque output of the power tool being used should be verified on the actual assembly using a calibrated measuring torque tool.

Includes three PC Windows based software programs:

Mountz Torque Meter Interface Program- for sensor calibrations, meter calibration and tool tests.

Torque Meter Bootloader - for updating the LTT operating systems.

Mountz Statistics Calculator - for SPC, CP & CPK calculations.

 

Applications

Industries

Downloads

DWS understands scales and balances better than anyone and can find custom solutions perfect for any application.

{{CartLength}} items in your Product Compare

Limit {{Limit}} compare items. Please remove one to add more.

#

Rental

{{CartItem.Name}}

{{CartItem.ModelNumber}}

{{Spec.Key}}: {{Spec.Value}},

×